There is two short peices of piping tacked on to the cross over pipe at the back of the head area and they are there purely for me to rest a rear spoiler on just to get a visual idea of how i'm going to take the focus away from the gearbox hanging out the back. Whilst looking at the rear of it tonight i also found another downside to using this motor, I can't afford to pull wheelies in it otherwise it will rip the bottom out of the transmission so i'll have to counteract that later on in the build.

The main pipe on either side of the trike that goes from the rear of the trike to the front has now been bent and welded up. I've also made the side plates that support the top suspension arms have currently bolted them in place so that i can take them on and off as needed, eventually they will be welded on permantely. Now that the plate is attached i have mounted the top suspension arms and as you can tell from this photo the wheels are sitting pretty damn good :-)